Portable Electromagnetic and RF Body Sculpting Machine Main View

Portable Electromagnetic and RF Body Sculpting Machine Separate Applicator

EM Sculpt RF Body Sculpting Machine

£804.78 GBP

The EM Sculpt RF Body Sculpting Machine combines electromagnetic muscle stimulation and 3 MHz radiofrequency in a single wired applicator. Its compact tabletop design fits on a small work surface.

Dual Technology: Electromagnetic muscle stimulation and 3 MHz RF in one applicator.
Targeted Application: Use the applicator on one selected body area at a time.
Simple Controls: Adjust intensity with the + and − buttons and check the selected level at a glance.
Strap Included: Secures the applicator in place so you can monitor the session without holding it throughout.

SKU: R006 Category: Beauty Equipment

Description

Product Overview

The system combines electromagnetic muscle stimulation and RF energy in one body applicator, bringing two technologies together for targeted body sculpting.

One Applicator for Multiple Body Areas

The separate body applicator can be positioned on the abdomen, buttocks, thighs, and upper arms for targeted body sculpting sessions. Each area is treated individually, with placement and intensity selected according to the user manual and individual suitability.

Abdomen

Position the applicator over the abdominal muscle area for targeted stimulation.

Buttocks

Position the applicator over the selected gluteal area, treating one side at a time.

Thighs

Reposition the applicator for selected thigh areas, following the placement guidance.

Upper Arms

Use the applicator on the selected upper arm area, following the recommended positioning.

How It Works: Two Technologies in One Applicator

One wired applicator combines electromagnetic muscle stimulation and 3 MHz radiofrequency.

Electromagnetic Muscle Stimulation

Magnetic pulses stimulate muscles in the selected area, causing them to contract and relax.

3 MHz Radiofrequency (RF)

The applicator delivers 3 MHz radiofrequency energy to generate heat in the selected area.

Designed for Studios with Limited Space

The machine has a compact tabletop unit measuring 34.5 × 33.5 × 26 cm and weighing 12 kg. It includes one wired applicator that combines electromagnetic muscle stimulation and 3 MHz radiofrequency. The applicator is used on one selected area at a time and rests in a dedicated recess on the main unit between sessions.

Intuitive Controls and Built-In Storage

Use the + and − buttons to adjust intensity. The indicator lights show the selected level. When you return the applicator to its built-in holder, a protection switch stops energy output.

Easy Positioning with Included Strap

The included strap holds the applicator in place, so you can monitor the session without holding it by hand the entire time.

See the Setup and Operation

Watch the machine in use, from connecting the applicator to adjusting intensity and positioning it on the selected body area. This demonstration provides a closer look at the controls and everyday setup.

For a demonstration of setup and controls. Follow the user manual for complete operating instructions.

Setup and Operation Essentials

Secure the Applicator Connection

Fully insert the applicator connector and tighten it securely before powering on the system.

Session Control from the Main Panel

Use the rear power switch to turn on the system. Follow the user manual for operation of the front session control button.

Adjust Intensity Gradually

Use the plus and minus buttons to adjust intensity. Begin at the lowest setting and follow the manual’s operating guidance.

Cleaning and Everyday Care

Keep the system clean and inspect its components regularly to support everyday operation.

Power Off Before Cleaning

Switch off and unplug the system before cleaning.

Wipe Exterior Surfaces

Use a damp cloth with mild soapy water or a neutral detergent, following the user manual.

Check Cables and Connections

Inspect the power cord and applicator connection before use. Stop using the system if any damage is found.

Contact Support for Repairs

Contact your supplier for troubleshooting, servicing, and replacement parts.

Before and After

Abdomen

Before and after comparison of the abdominal area.

Buttocks

Before and after comparison showing changes in buttock appearance.

Inner Thighs

Before and after comparison showing changes in inner thigh appearance.

Upper Arms

Before and after comparison of the upper arm area.

Individual results vary. Results shown do not guarantee the same outcome for every user.

Technical Specifications

Specification	Details
Electromagnetic Field Strength	0–3.5 T
RF Frequency	3 MHz
Pulse Shape	Biphasic Wave
Pulse Width	300 μs
Power Supply	AC110–250 V, 50/60 Hz
Main Unit Dimensions	34.5 × 33.5 × 26 cm / 13.58 × 13.19 × 10.24 in
Net Weight	12 kg / 26.46 lb
Package Dimensions	50 × 44.5 × 34 cm / 19.69 × 17.52 × 13.39 in
Gross Weight	17 kg / 37.48 lb

What’s Included

Item	Quantity
Main Unit	1
Body Applicator with Connecting Cable	1
Applicator Securing Strap	1
Power Cord	1
User Manual	1

FAQ

Does the machine include both electromagnetic stimulation and RF?

Yes. The system combines electromagnetic muscle stimulation and 3 MHz RF technology in one body applicator.

Which body areas can the applicator be used on?

The applicator is intended for selected areas of the abdomen, buttocks, thighs, and upper arms. Follow the user manual for placement and operating instructions.

How long is a session for the abdomen or buttocks?

The user manual lists approximately 15 minutes per session for the abdomen or buttocks. Follow the instructions supplied with your unit for the selected area.

Can it work on multiple body areas at the same time?

The machine includes one body applicator, so areas are treated individually. Reposition the applicator when moving to another area.

How do I adjust the intensity?

Use the plus and minus buttons on the main unit. The indicator lights show the selected intensity level.

What happens when the applicator is returned to its storage position?

A built-in protection switch stops energy output when the applicator is returned to the dedicated recess. Switch off the system after use according to the user manual.

Is a US plug available?

Yes. The US version comes with a US plug and supports AC 110–250 V, 50/60 Hz.

Can I see how the machine operates before purchasing?

Yes. The operation video on this page demonstrates applicator connection, intensity adjustment, and positioning. Contact us if you need further product details.